REAR AXLE AND SUSPENSION - Four Link Type Rear Suspension (4WD)
Rl-+S
5.
INSTALL LATERAL CONTROL ROD
In order, install a washer, bushing, spacer, lateral control
rod, bushing, washer and nut on the rear axle housing.
Do not tighten the nut yet.
6.
INSTALL SHOCK ABSORBER
b)
Connect the shock absorber to the body with the nut.
Hold the shaft with an adjustable wrench. Torque the
nut.
Torque: 250 kg-cm (18 ft-lb, 25 N.m)
(b) Connect the shock absorber to the rear axle housing
with the nut Torque the bolt.
Torque: 375 kg-cm (27 ft-\b,37 N.ml
7.
INSTALL STABILIZER BAR BUSHING BRACKETS TO
REAR AXLE
8.
STABILIZESUSPENSION
Remove the stands and bounce the car to stabilize the
suspension.