a
BR-26
BRAKE SYSTEM - Rear Brake {Sedan)
5.
APPLY HIGH TEMPERATURE GREASE TO
FOLLOWING PARTS:
(a) Backing plate and brake shoe contact points
(b) Anchor plate and brake shoe contact points
(c) Strut and adjusting bolt contact points
(d) Strut and brake shoe contact points
6.
INSTALL PARKING BRAKE LEVER AND AUTOMATIC
ADJUSTING LEVER TO REAR SHOE
(d
Temporarily install the levers with the shim and a
new C-washer.
(d
Using a feeler gauge, measure the clearance between
the shoe and lever.
Standard clearance: O - 0.35 mm (O - 0.0138 in.l
lf not within specification, adjust with a shim.
Shim thicknesses
mm (in.)
0.2 (0.008)
|
0.5 (0.020)
0.3 (0.012)
|
0.6 (0.024)
0.4 (0.016)
|
0.s (0.035)
(cl Using pliers, stake the C-washer.
INSTALL STRUT ONTO REAR SHOE
Set the strut in place and intall the adjusting lever spring.
7.
wl