FRONT AXLE AND SUSPENSION - Front Suspension
FA.28
REPLACEMENT OF LOWER ARM BUSHING
1.
REMOVE LOWER ARM BUSHING
(a) Cut off the flange tip of the bushing as is shown in
the figure.
(b) Bend the remaining portions inward with a cold
chisel.
CAUTION: Be careful not to damage the flange.
(c) Bend in the flange tips and pull off the flange with a
pair of pliers.
(d) Using SST and a press, press out the bushing.
ssT 09726-32010
INSTALL LOWER ARM BUSHING
Using SST and a press, press the bushing into the arm.
ssr 09726-32010
CAUTION: Do not allow grease or oil to get on the
bushing.
2.