Wagon 4Wd - Toyota Tercel 1985 Repair Manual

BR-36
BRAKE SYSTEM - Rear Brake (Wagon 4WD)
Wagon 4WD
COMPONENTS
Strut and Return Spring
O C-Washer
$ry"<'i
shoe
lot
Anchor Spring
Automatic Adjusting Lever
arking Brake Lever
6f,Aai""tins
Shim
Rear Shoe
Hold-down Spring
clip |
,u
| | / / / ,
{A TK
Front
Backing Ptate
O: Non-reusable part
Wheel Cylinder
\
6\ \\
q \\\
Y(( ^W
F\\
-/
// //
*
//l
w
REMOVAL OF REAR BRAKE
1. INSPECT SHOE LINING THICKNESS
Remove the inspection hole plug, and check the shoe lin-
ing thickness through the hole.
lf less than minimum, replace the shoes.
Standard thickness:
4.0 mm (0.157 in.)
Minimum thickness:
1.0 mm (0.039 in.)
2. REMOVE REAR WHEEL
3. REMOVE BRAKE DRUM
lf the brake drum cannot be easily removed, do the follow-
ing procedure:
(a) Insert a screwdriver through the hole in the backing
plate, and hold the automatic adjusting lever away
from the adjusting bolt.
(d
Using another screwdriver, reduce the brake shoe
adjustment by turning the adjusting bolt.