Toyota Tercel 1985 Repair Manual page 580

BRAKE SYSTEM - Front Brake
BR-2;1,,,":l-
4. INSTALL COLLAR, DUST BOOT AND CYLINDER
SLIDE BUSHING
(a) Installthe collar and dust boot into the brake "VlinOer.'"'f,.
(b) Check that the boot is secured firmly to the brlkp
cylinder groove.
';1"t,
(c) Install the bushing into the boot.
(d) Check that the boot is secured firmly to the bushing
groove.
t:' t;
INSTALLATION OF CYLINDER
JS .t
(See page BR-l61
1.
INSTALL PADS
,,,\$,
(See steps 7 to 9 on pag6s BR-17 and 18)-i
2.
INSTALL CYLINDER
(See step 11 on page BR-271
3. INSTALL FLEXIBLE HOSE TO BRAKE CYLINDER
Torque: 235 kg-cm (17 ft-lb, 23 N.m)
4. CONNECT FLEXIBLE HOSE TO BRAKE TUBE
Using SST, connect the flexible hose.
ssT 09751 -3601 1
Torque: 155 kg-cm (11 ft-lb, 15 N.ml
5. FILL BRAKE RESERVOIR WITH BRAKE FLUID
AND BLEED BRAKE SYSTEM (See page BR-71
SST