Toyota Tercel 1985 Repair Manual page 591

o / ' \ \
; z \ o /
INSPECT BRAKE LINING AND DRUM FOR PROPER
CONTACT
Replace the brake shoe or lathe the brake drum as necess-
4ry.
INSPECT WHEET CYLINDER FOR CORROSION OR
DAMAGE
INSPECT BACKING PLATE FOR WEAR OR DAMAGE
INSTALLATION OF REAR BRAKE
(See page BR-291
1.
APPLY LITHIUM SOAP BASE GLYCOL GREASE
TO FOLLOWING PABTS:
(d
Two piston cups
(b) Two pistons
2.
ASSEMBLE WHEEL CYLINDER
(a) lnstall two new piston cups to each piston, check
that the flanges of the cups are pointed inward.
(b) Install the two pistons and spring into the wheel
cylinder.
(c) Install two new boots.
3.
INSTALL WHEEL CYLINDER
Installthe wheelcylinder on the backing plate with the two
bolts.
Torque: 1OO kg-cm (7 ft-lb, 1O N.ml
4.
CONNECT BRAKE TUBE TO WHEEL CYLINDER
Using SST, connect the brake tube
ssT 09751 -3601 1
Torque: 155 kg-cm (11 ft-lb, 15 N.ml
4.
5.
Pistoncu'
^cloqO
fl@6alA"
Y r l
I I Piston
I
SPring
Boot