-
RA-6
REAR AXLE AND SUSPENSION - Rear Axle Hub and Carrier (FWD)
3.
DISCONNECT BRAKE TUBE FROM WHEEL CYLINDER
Using SST, disconnect the brake tube.
ssT 09751 -3601 1
4.
REMOVE AXLE SHAFT
Remove the bolts holding the axle shaft to the carrier, and
remove the axle shaft and rear brake assembly.
5.
REMOVE AXLE CARRIER
(d
Remove the bolt and nut holding the axle carrier to
the strut rod.
(b) Remove the bolt and nut holding the axle carrier to
the No.1 suspension arm.
(d
Remove the bolt and nut holding the axle carrier to
the No.2 suspension arm.