Toyota Tercel 1985 Repair Manual page 584

BRAKE SYSTEM - Rear Brake (Sedan)
8R.25
Apply Grease
3.
INSPECT BRAKE LINING AND DRUM FOR PROPER
CONTACT
Replace the brake shoe or lathe the brake drum as necess-
4ry.
4. INSPECT WHEEL CYLINDER FOR CORROSION OR
DAMAGE
5. INSPECT BACKING PLATE FOR WEAR OR DAMAGE
INSTALLATION OF REAR BRAKE
(See page BR-221
1.
APPLY LITHIUM SOAP BASE GILYCOL GREASE
TO FOTLOWING PARTS:
(d
Two piston cups
(b) Two pistons
,, ,
. .
' t
2. ASSEMBLE WHEEL CYLINDER
(a) Install two new piston cups to the pistons.
(b) Install the two pistons and spring into the wheet
cylinder. Check that the flange of the pistons are
pointed inward.
(c) Install two new boots.
3. INSTALL WHEEL CYLINDER
Install the wheel cylinder on the backing plate with the two
bolts.
Torque: lOO kg-cm (7 ft-lb, 1O N.ml
4. CONNECT BRAKE TUBE TO WHEEL CYLINDER
Using SST, connect the brake tube.
ssT 09751 -3601 1
T o r q u e : 1 5 5 k g - c m ( 1 1 f t - l b , 1 5 N . m l
Ao@O
o@rT*1,,i""
l l c u p
t t
I
Spring
Boot