Toyota Tercel 1985 Repair Manual page 549

REAR AXLE AND SUSPENSION - Differential (4WD)
RA.41
15. INSTALL ADJUSTING NUT LOCKS
(a) Select either a lock plate No. 1 or No. 2 whichever
will fit the adjusting nuts.
(b) lnstall the lock plate on the bearing caps.
Torque: 55 kg-cm (48 in.-lb, 5.4 N'ml
INSTALLATION OF DIFFERENTIAL
(See page RA-281
1.
INSTALL DIFFERENTIAL CARRIER ASSEMBLY
Install a new gasket and the differentialcarrier assembly in
the axle and install the twelve nuts. Torque the nuts.
Torque: 315 kg-cm (23 ft-lb, 31 N'm)
2.
CONNECT PROPELLER SHAFT FLANGE TO
COMPANION FLANGE (See page PR-61
3.
INSTALL REAR PLUG AND FILL DIFFERENTIAL WITH
GEAR OIL
Torque the drain plug.
Torque: 500 kg-cm (36 ft-|b,49 N'm)
Oil grade: API GL-s hypoid gear oil
Viscosity: Above - 18"C (O'Fl SAE 90
Below - 18'C (0"F) SAE 8OW
or 80W-90
Capacity: 1.0 liters (1.1 US qts, 0.9 lmp. qts)
Torque the filler plug.
Torque: 500 kg-cm (36 ft-|b,49 N'ml
5 mm (0.2O in.)