RA-48
REAR AXLE AND SUSPENSION - Four Link Type Rear Suspension (4WD)
(d
Jack up the axle housing.
(d) Torque the nut.
Torque:
Body side
1,2OO kg-cm (87 ft-lb, 1 18 N.m)
Axle housing side
650 kg-cm {47 ft-lb, 64 N.ml
Upper and Lower Gontrol Arm
(See page RA-421
REMOVAL OF UPPER AND LOWER CONTROL
ARM
1.
JACK UP VEHICLE
Jack up the vehicle and support the body with stands.
Hold the rear axle housing with a jack.
2.
REMOVE UPPER CONTROL ARM
(a) Remove the bolt holding the upper controlarm to the
body.
(b) Remove the bolt holding the upper control arm to the
rear axle housing, then remove the upper control arm.
3.
REMOVE LOWER CONTROL ARM
(a) Remove the bolt holding the lower control arm to the
body.