Toyota Tercel 1985 Repair Manual page 555

REAR AXLE AND SUSPENSION - Four Link Type Rear Suspension (4WD)
RA.47
Chamfer
RAO343
2.
INSTALL BUSHING
Using SST and a press, press a new bushing into the
lateral control rod.
ssT 0971 0-14012
NOTE: Do not use a lubricant when pressing in the bush-
ing.
INSTALLATION OF LATERAL CONTROL ROD
1. INSTALL LATERAL CONTROL ROD TO BODY
(a) Raise the axle housing until the housing is free from
the stands.
(b) Installthe lateralcontrol rod to the body with the nut.
INSTALL LATERAL CONTROL ROD TO REAR AXLE
HOUSING
(d
Consecutively install the washer, bushing, spacer,
lateral control arm, bushing, washer and nut on the
rear axle housing.
(b) Remove the stands and bounce the car to stabilize
the suspension.
2.