Xtreme Power Conversion M90S Series User & Installation Manual page 53

M90S-4S User's Manual Uninterruptible Power Supply
5.2.1 Setup-Battery Screen
Use " " or " " button to switch different sub-menus. Press " " button to go into the
BATTERY setting screen, as shown in Figure 5-22 and 5-23.
Figure 5-22 Setup-Battery Screen page 1
Figure 5-23 Setup-Battery Screen page 2
Battery setting can be set only when UPS is operating in standby mode. If it's not in standby mode, the warning
screen will appear as shown in Figure 5-24. See Setup-Battery setting list in Table
4-6.
Xtreme Power Conversion Corporation Page 53