M90S-4S User's Manual
3) Reset Events
It's necessary to enter password to enter Reset Events page as shown below. Then,
to choose "Yes" to clear all history events or "No" to cancel the reset action. The default password is 0729.
5.5 Controller Module
Front View:
Back View:
EMBS port (external maintenance bypass signal port)
5.6 Battery Start Button
The controller module can be turned on without connecting to utility by pressing Battery Start Button.
5.6.1 Status LED
The green LED represents operation status of controller module.
Color
Green
Xtreme Power Conversion Corporation
Status
Flashing
Off
Uninterruptible Power Supply
press "
" or "
Definition
Communications: On/0.1s, Off/0.4s.
Un-Connection: On/0.1s, Off/0.4s.
ID conflict or Power off
"
button
Page 80