Xtreme Power Conversion M90S Series User & Installation Manual page 51

M90S-4S User's Manual
Setup-System setting list is shown in Table 5-4.
Table 5-4: Setup-System setting list
Output
--
Voltage
ECO Voltage Range
ECO Setting
ECO Frequency Range
Bypass Voltage Range
Bypass
Setting
Bypass Frequency Range
ECO Mode --
Xtreme Power Conversion Corporation
Uninterruptible Power Supply
Set output voltage
• 100Vac
• 110Vac
• 115Vac
• 120Vac(Default)
• 127Vac
MUST be reviewed after UPS
installation
Set ECO voltage range:
Upper Range
• (Output Setting Voltage +6V) ~
(Output Setting
• Voltage +12V)
• (Output Setting Voltage +6V)
(Default)
Lower Range
• (Output Setting Voltage -6V) ~
(Output Setting
• Voltage -12V)
• (Output Setting Voltage -6V)
(Default)
Set bypass Frequency range: Upper/
Lower limit
• +/- 2Hz (Default)
• +/- 3Hz
• +/- 4Hz=
Set bypass voltage range:
Upper Range
• (Output Setting Voltage +6V) ~
155V
• 140V (Default)
Lower Range
• (Output Setting Voltage -6V) ~
88V
• 88V (Default)
Set bypass Frequency range:
Upper/ Lower limit
• +/- 1Hz
• +/- 2Hz
• +/- 3Hz
• +/- 4Hz (Default)
Set ECO mode
• Disable (Default)
• Enable
Page 51