Xtreme Power Conversion M90S Series User & Installation Manual page 43

M90S-4S User's Manual
Positive Voltage (V)
Negative Voltage (V)
Positive Current (A)
Negative Current (A)
Remain Time (Sec)
Capacity (%)
Battery
Test Result
Charging Status
Temperature1(°C)
Temperature2(°C)
Temperature3(°C)
Setup Screen
Use " " or " " button to choose SETUP options. It's required to enter password to access
GENERAL, SYSTEM, BATTERY and PRE-ALARM sub-menus, as shown in Figure 5-12.
When the SETUP option is selected by pressing "
word will pop up, as shown in Figure 5-13.
Xtreme Power Conversion Corporation
Battery Positive Voltage. Units 0.1V.
Battery Negative Voltage. Units 0.1V.
Battery Positive Current. Units 0.1A.
Battery Negative Current. Units 0.1A.
Battery run time remaining. Units 1Min.
The percentage of the capacity of the battery. Units 1%.
Battery test result
Battery charging status
Internal temperature of UPS module. Units 0.1°C.
Battery cabinet temperature of extra communication card T1.
Units 0.1°C.
Battery cabinet temperature of extra communication card T2.
Units 0.1°C.
Figure 5-12 Setup menu
" button, it will pop up a screen requesting to enter pass-
Figure 5-13 Enter password Screen
Uninterruptible Power Supply
Page 43