M90S-4S User's Manual
Use "
" or "
" button to choose System and UPS module option (MASTER#00 or SLAVE#01). Then, press "
" button to go into the submenu, as shown in Figure 5-11.
Use "
" or "
" button to choose Input, Output, Bypass, Load, and Battery option, and press "
go into submenu. The measurement can be read as listed in Table 4-1.
Table 4-1: Measurement data
Menu
Item
L-N Voltage (V)
Input
Frequency (Hz)
L-N Voltage (V)
L-N Current (A)
Outpu
Frequency (Hz)
Power Factor
L-N Voltage (V)
Bypass
Frequency (Hz)
Power Factor
Sout (KVA)
Pout (KW)
Load
Load Level (%)
Xtreme Power Conversion Corporation
Figure 5-11 Measurement source selection Screen
Explanation
Input phase voltage (L1, L2). Units 0.1V.
Input Frequency (L1, L2). Units 0.1Hz.
Output phase voltage (L1, L2). Units 0.1V.
Output phase current (L1, L2). Units 0.1A.
Output Frequency (L1, L2). Units 0.1Hz.
Output Power Factor (L1, L2).
Bypass phase voltage (L1, L2). Units 0.1V.
Bypass Frequency (L1, L2). Units 0.1Hz.
Bypass Power Factor (L1, L2).
Apparent power (L1, L2). Units 0.01KVA.
Active power (L1, L2). Units 0.01KW.
The percentage of the UPS rating load (L1, L2). Units
1%.
Uninterruptible Power Supply
" button to
Page 42