Table of Contents
Advertisement
G7 Installation & Operation
Stream and log data via Serial cable
1. Connect the A_RS232 port of the aviation plug (See Figure 5) to a PC, and
determine the COM port.
2. Launch Tera Term, and connect to the desired COM port (see Figure 42)
3. Set the baud rate to match that of the G7 baud rate. Go to Setup Serial port as
shown in Figure 45.
4. See Figures 43 and 44 above to log data.
Document PN 29010107 V1r1
Figure 44 – Data logging using Tera Term.
Figure 45 – Baud rate setup.
- 76 -
Advertisement
Table of Contents
