Table of Contents
Advertisement
G7 Installation & Operation
If you cannot choose a radio frequency that matches the base station from the
radio channel list, please select the radio channel as "0" and then a pop-up
window will appear in the browser as shown in Figure 26. Type the password
(by default it is 123456). If the password is correct, then you can type the radio
frequency to make it match with base station. Please note the radio frequency
range.
For the receiver, the built-in radio type is Satel and radio frequency ranges
from 403MHz to 473Mhz. when you set the receiver work in this kind of mode,
please pay attention to the following points:
Document PN 29010107 V1r1
Figure 25 – Set the UHF radio setting.
Figure 26 – UHF Radio setting.
- 58 -
Advertisement
Table of Contents
