Table of Contents
Advertisement
G7 Installation & Operation
Radio antenna cable
The connection between the external radio antenna and the G7 receiver is
showed in Figure 13 below.
1. Locate the correct connector for the radio antenna.
2. Make sure the connectors at the receiver and antenna ends are both
tightened.
3. Place the radio antenna in a suitable place, refer to the installation
method of the GNSS antenna.
Aviation plug cable
The connection between the aviation plug cable and the G7 receiver is shown
in Figure 14. Please follow the steps below to make the connection finished.
1. Align the grooves in the connector and projections of the aviation plug cable.
2. Pull the plug into the connector about 5 millimeters.
3. Pull the locker forward to the head of the plug and rotate it to the connector.
Document PN 29010107 V1r1
Figure 13 – UHF radio antenna connected to G7.
- 41 -
Advertisement
Table of Contents
