Table of Contents
Advertisement
G7 Installation & Operation
3. Select the "RTK work mode" menu and click "Change work mode" at the bottom of
the page, select "RTK work mode" as "Auto Rover", "Data link" as "Rover Ntrip/IP".
Type IP address and port about the CORS service into the "Server IP" and "Port"
frame.
4. Get source table by click the "get" option and select the proper RTK correction data
format from the source table list. If there is nothing in the source table, please try it
again and check the network setting in "Module" menu. If it is working then you can
type the account and password in the "User Name" and "Password" fields. After that,
click "Confirm" button to make the changes effective.
Document PN 29010107 V1r1
Figure 27 – Connect the G7 to the cellular network.
Figure 28 – RTK mode setup using NTRIP.
- 60 -
Advertisement
Table of Contents
