G7 Installation & Operation
L
H
J
Table 4 – Aviation plug connector and pin assignment.
A description of the connectors is as follows:
A_RS232: DB9 female RS232 port, used for data output from receiver
B_RS232: DB9 female RS232 port, direct connection with built-in
GNSS board
CAN: Can port, work as a can device, used for data output
SMA: PPS signal port, used for PPS time service
RJ45: Ethernet port, used for longing to the webpage from the built-in
GNSS board
DC Jack: power supply port (voltage range: 9 ~ 36V DC )
Additional equipment and software
The following additional equipment and software are required to operate the
G7.
Additional equipment
1. General-purpose tools:
Portable drill, pliers, wire cutters, screwdrivers, wire, mounting
bolts and wrenches.
2. Measuring instrument:
Accurate voltmeter or multi-meter.
3. Power Supply:
Document PN 29010107 V1r1
DC Jack
DC Jack
POWER-
DC Jack
- 29 -
2A Current