Table of Contents
Advertisement
G7 Installation & Operation
4G antenna cable
The connection between the 4G signal antenna and the G7 receiver is shown
in Figure 12 below. Please note the following:
1. Locate the correct connector for the 4G antenna.
2. Make sure the connectors at the receiver and antenna ends are both
tightened.
3. Place the 4G antenna in a suitable place, refer to the installation method
of the GNSS antenna.
Figure 12 – 4G signal enhancement antenna connected to G7.
Document PN 29010107 V1r1
Figure 11 – Dual GNSS antenna connection.
- 40 -
Advertisement
Table of Contents
