Table of Contents
Advertisement
G7 Installation & Operation
GPS L1, L2,
L5;
GLONASS L1,
L2;
BDS: B1, B2,
B3;
C220
Galileo: E1,
Geodetic
E2,
GNSS
E5a, E5b, E6;
Antenna
SBAS: L1 C/A,
L5;
QZSS: L1 C/A,
L1 SAIF, L2C,
L5;
L-Band;
Other GNSS antennas may however be used. Please ensure that the antennas
support the required GNSS frequencies and operates at either 3.3V or 7.1V with
a signal greater than 40 dB at the antenna port.
Mounting cables
This chapter illustrates how to connect the different accessories to the G7.
Please read carefully to avoid installation errors.
Overview
The full connection between the receiver and the accessories are shown in
Figure 10 below.
Document PN 29010107 V1r1
MIL-STD-
4.9
kg
810G
IP67
Table 6 – Recommended antenna specifications.
- 38 -
IGS
Advertisement
Table of Contents
