Table of Contents
Advertisement
G7 Installation & Operation
In "Auto Base" mode, the receiver will broadcast correction data based on the
coordinate which is obtained through autonomous positioning automatically. It
is used when the receiver location is unknown beforehand.
In "Manual Base" mode, the receiver will broadcast correction data based on
the coordinate which is entered manually or "Acquired Current Position" by
clicking the button. It is used when the Base station is already known or
surveyed.
3. Select the correction data format and finished by "Confirm" click.
Computer version
1. Connect the PC's WiFi to the receiver and login.
2. Go to "Receiver configuration" menu, then click "Reference station setting" submenu
and choose "Auto Base" or "Manual Base" as shown in
Figure 33.
Document PN 29010107 V1r1
Figure 32 – Base Internal UHF radio setting.
- 63 -
Advertisement
Table of Contents
