Table of Contents
Advertisement
G7 Installation & Operation
The Normal size card should be cut to the Micro size before inserting it into the
SIM card slot. Similarly, the Nano size card can also be used with a special
adapter to convert it to Micro. However, these two methods are not
recommended.
Card installation
The following steps show the installation method of the SIM card, please follow
these steps when you make the installation for the first time.
1. Disconnect the power to the receiver, the installation should be carried out without
power supply.
2. Unscrew the four fixing screws in the SIM card cover with screwdrivers, after the
cover is removed, the SIM card slot will appear as shown in Figure 16 below
3. Follow the direction of opening in the slot to unlock the locker to get SIM card in at
proper position then close the locker and follow the direction of locking to get it
locked. Be careful not to use too much force to the locker.
Document PN 29010107 V1r1
Nano
Figure 15 – SIM card size illustration.
Figure 16 – SIM card compartment.
- 43 -
Advertisement
Table of Contents
