Rear Connectors; Figure 1 - Front View Of The G7 Showing Four Connectors: Gnss1, Gnss2, 4G And Com; Figure 2 - Rear View Of The G7 Showing The Uhf Radio Connector And Mini Usb Port - ComNav G7 Installation & Operation Manual

G7 Installation & Operation
Figure 1 – Front view of the G7 showing four connectors: GNSS1, GNSS2, 4G and COM.
A description of the connectors is as follows:
 GNSS1 Connector: TNC male connector for positioning antenna
 GNSS2 Connector: TNC male connector for vector antenna
 4G Connector: TNC male connector for 4G cellular antenna signal
enhancement
 COM Connector: Customize aviation plug for hardware interface
integration. For more details refer to the accessories section below.

Rear Connectors

The Figure 2 shows a rear view of the receiver. The rear panel contains one
TNC connector and one Mini USB port.
Figure 2 – Rear view of the G7 showing the UHF radio connector and mini USB port.
Document PN 29010107 V1r1 - 22 -