Figure 34 - Radio Settings; Figure 35 - Differential Data Settings Using Radio - ComNav G7 Installation & Operation Manual

G7 Installation & Operation
4. Go into "IO settings" menu and select correction data format in "Differential Data"
drop-down box. "Confirm" to make the setting effective.
Please pay attention on the following tips when you set the receiver work in this
mode.
1. Make sure that the radio antenna is installed properly with the antenna
installation guidance.
2. Take care of the latitude and longitude direction when you use the
manual base mode. Wrong direction will lead no correction data will be
sent.
3. Check the receiver's LED status to monitor the correction data send
status when all the operations are finished.
Document PN 29010107 V1r1
Figure 34 – Radio settings.
Figure 35 – Differential data settings using Radio.
- 65 -