Device
holds settings related to footscan devices:
Calibration interval
PSL replaced
Export
holds settings which affect how footscan 9 exports data:
Destination folder for
data export (.rsdb)
Destination folder for
pressure images export
File format for pressure
images export
Dots per inch (dpi) for
pressure images export
Destination folder for 3D
scan export
File format for 3D scan
export
Destination folder for
plantar
surface
export
RS-PRD-00562-016
®
Updates the time between two calibrations (Section 6.1).
Changes the orientation of every preview showing the
activity on the plate.
Button to signal the calibration server that the PSL of the
selected device has been replaced (Section 4.5).
Figure 22:
Settings affecting data export
Displays the folder where footscan
exported sessions (See Chapter 8). Click
choose a different folder.
Displays the folder where footscan
images (See Chapter 8). Click
different folder.
Modifies the file format of exported images.
Modifies the dots per inch (dpi) of exported images.
Displays the folder where footscan 9 saves the exported
3D scan measurements (See Chapter 8). Click
to choose a different folder.
Modifies the file format of the exported 3d scans.
Displays the folder where footscan 9 saves the exported
photo
plantar surface photos (See Chapter 8). Click
to choose a different folder.
®
®
9 saves data from
®
9 saves exported
Browse... to choose a
®
®
Browse... to
Browse...
Browse...
69
Need help?
Do you have a question about the footscan and is the answer not in the manual?