Safety Inspections - RSscan footscan User Manual

1.5 Safety Inspections

This section contains important instructions regarding safety. Please read
them carefully.
Prior to each measurement session, visually inspect the measurement surface of
the footscan plate, do not use the footscan plate if the protective sticker or rubber
is loose or damaged to such an extent that the client could trip or get injured.
Replacement stickers and rubbers can be ordered from rs scan or its local
distributors.
Prior to each measurement session, visually inspect the cable and client runway,
ensuring maximum safety for the client while being measured.
On a weekly basis, inspect the cable and connection. Do not use the system if the
cable is damaged. Detachable cables can be replaced by the user, replacement
cables are available from rs scan or its local distributors.
RS-PRD-00562-016
® ®
19