Licensing - RSscan footscan User Manual

4.1 Licensing

®
To prevent unauthorized usage, footscan 9 only runs when a licensed device is
plugged into your computer. A licensed device may be either a footscan plate, 3D ®
scanner or a USB2 hardware dongle. License information of the footscan device(s) is ®
present in the configuration file. The installer medium includes a valid configuration file
®
and factory calibration file(s) which covers your footscan device(s). The installer
automatically copies these files to your computer. If no licensed device is connected
while the application is running the Security dialog (Figure 3) pops up. This dialog
disappears once a licensed device is plugged into the computer.
Figure 3:
The Security dialog pops up when no licensed device is connected while the
application is running. It disappears once a licensed plate or dongle is plugged into the
computer.
The Security dialog might appear while the device is connected to the computer. This is
the case when the current license does not cover the connected device. Choose
Manage calibration to open the license and hardware calibration dialog to review which
devices are licensed in your current configuration file (Figure 4).
Figure 4: ®
The License and hardware calibration dialog lists all connected footscan
devices.
The License and hardware calibration dialog lists the serial numbers of all covered
®
footscan devices, along with their descriptions, license and calibration information.
Cross-reference the serial number of the connected device (on the identification plate at
the back) with the License and hardware calibration dialog list and contact rs scan's
support department at support@rsscan.com for further assistance.
Installing a new configuration file and information about your acquired footscan
package and modules can be found in the software package and modules dialog,
RS-PRD-00562-016 46