RSscan footscan User Manual page 153

® ®
Once a footscan 7 pressure plate is converted to work with footscan 9, it
®
can no longer be used with your old footscan 7 software!
It is necessary to properly calibrate your device to obtain correct
measurement values. If the calibration procedure as described in the
footscan 7 manual, was not regularly performed, the absolute pressure ®
values of the footscan 7 data converted to footscan 9 will be wrong. New ® ®
®
measurements made with footscan 9 will have correct measurement values,
® ®
but existing footscan 7 measurements which are imported into footscan 9
will retain their original measurement values, even if they were wrong due to
bad calibration.
RS-PRD-00562-016 153