D-Link Dis-200G Series Web Ui Reference Manual page 126

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
The following icons are available in this window and are described below:
Parameter
After clicking the icon, the following window will appear:
Click the Apply button to accept the changes made.
Click the Cancel button to discard the changes made.
Description
This displays the total amount of ONVIF IP cameras connected to
the Ethernet ports on the Switch.
This displays the total amount of D-Link legacy IP cameras
(detected by ASV 1.0) connected to the Ethernet ports on the
Switch.
This displays the total amount of Network Video Recorders (NVRs)
connected to the Ethernet ports on the Switch
This displays the amount of surveillance warnings generated on
the Switch.
This displays the amount of other devices connected to the
Ethernet ports on the Switch.
This displays the device connected to the Ethernet port on the
Switch. The green border around the image indicates that the
device is a non-PoE device. The PD Alive function cannot be used
on this device.
This displays the device connected to the Ethernet port on the
Switch. The blue border around the image indicates that the
device is a PoE device and is receiving power from the Switch
using PoE. The PD Alive function can be used on this device.
Click this icon to disable PoE on the port.
Click this icon to enable PoE on the port.
Figure 12-2 PoE Configuration window
115