D-Link Dis-200G Series Web Ui Reference Manual page 65

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Native VLAN
VID
Action
Add Mode
Allowed VLAN Range
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
When Trunk was selected as the VLAN Mode, the following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Native VLAN
VID
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to
choose from are Tagged Only, Untagged Only, and Admit All.
Select the check box to enable or disable the ingress checking
function.
Tick this option to enable the native VLAN function.
After ticking the Native VLAN check box, this option will be
available. Enter the VLAN ID used for this configuration here. This
value must be between 1 and 4094.
Select the action that will be taken here. Options to choose from
are
Add, Remove, Tagged, and Untagged.
Select whether to add an Untagged or Tagged parameters.
Enter the allowed VLAN range information here.
Figure 6-21 Configure VLAN Interface - Trunk window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to
choose from are Tagged Only, Untagged Only, and Admit All.
After selecting Trunk as the VLAN Mode the following parameter
will be available. Select to enable or disable the ingress checking
function.
Tick the check box to enable the native VLAN function. Also select
if this VLAN supports Untagged or Tagged frames.
After ticking the Native VLAN check box, this option will be
available. Enter the VLAN ID used for this configuration here. This
58