D-Link Dis-200G Series Web Ui Reference Manual page 81

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After clicking the ERPS Brief tab, the following page will appear.
Guide After click the Edit Instance button, the following window will appear.
The fields that can be configured are described below:
Parameter
Description
R-APS Channel VLAN
Inclusion VLAN List
MEL
Select the Specify radio button to configure this parameter as per
normal. Select the None radio button to revert this parameter to
the default setting.
Figure 6-42 ERPS Brief window
Figure 6-43 E
RPS (Edit Instance) window
Description
Select the checkbox and enter the ERP instance's description here
This description can be up to 64 characters long. Select the
Specify radio button to configure this parameter as per normal.
Select the None radio button to revert this parameter to the default
setting.
Select the checkbox and enter the R-APS channel VLAN's ID for
the ERP instance here. The APS channel VLAN of a sub-ring
instance is also the virtual channel of the sub-ring. This value must
be between 1 and 4094. Select the Specify radio button to
configure this parameter as per normal. Select the None radio
button to revert this parameter to the default setting.
Select the checkbox and then select the switch's unit ID and the
port number that will be the second ring port of the physical ring.
Select the None option, from the drop-down menu, specifies that
the inter- connected node is a local node endpoint of an open ring.
Select the Specify radio button to configure this parameter as per
normal. Select the None radio button to revert this parameter to
the default setting.
Select the checkbox and enter the ring MEL value of the ERP
instance here. This value must be between 0 and 7. The
configured MEL value of all ring nodes that participate in the same
74