Save - D-Link Dis-200G Series Web Ui Reference Manual

To view the following window, click Tools > Reset, as shown below:
Select the The Switch will be reset to its factory defaults including IP address, and then will save,
reboot option to reset the Switch's configuration to its factory default settings.
Select the The Switch will be reset to its factory default except IP address, and then will save,
reboot option to reset the Switch's configuration to its factory default settings. This option will exclude the
IP address from being changed.
Select the The Switch will be reset to its factory defaults including IP address option to reset the
Switch's configuration to its factory default settings.
Click the Apply button to initiate the factory default reset and reboot the Switch.
Reboot System
This window is used to reboot the Switch and alternatively save the configuration before doing so.
To view the following window, click Tools > Reboot System, as shown below:
When rebooting the Switch, any configuration changes that was made during this session, will be lost
unless the Yes option is selected when asked to save the settings.

Save

Save Configuration
This window is used to save the running configuration to the start-up configuration or the file system of
the Switch. This is to prevent the loss of configuration in the event of a power failure.
To view the following window, click Save > Save Configuration, as shown below:
Click the Apply button to save the configuration.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 12-24
Figure 12-25
Figure 12-26
Reset window
Reboot System window
Save Configuration window
133