D-Link Dis-200G Series Web Ui Reference Manual page 89

The fields that can be configured for VLAN Querier Status Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
The fields that can be configured for VLAN Fast Leave Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
IGMP Snooping Groups Settings
This window is used to configure and view the IGMP snooping static group, and view IGMP snooping
group.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Groups Settings, as shown below:
The fields that can be configured for IGMP Snooping Static Groups Settings are described below:
Parameter
VID
Group Address
From Port / To Port
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Description
Enter a VLAN ID from 1 to 4094, and select to enable or disable
IGMP snooping querier on the VLAN.
Description
Enter a VLAN ID from 1 to 4094, and select to enable or disable
IGMP snooping fast leave on the VLAN.
Figure 6-52 IGMP Snooping Groups Settings
Description
Enter a VLAN ID of the multicast group.
Enter an IP multicast group address.
Select the appropriate port range used for the configuration here.
82