Smart Wizard - D-Link Dis-200G Series Web Ui Reference Manual

Smart Wizard

After a successfully connecting to the Web User Interface for the first time, the Smart Wizard embedded
Web utility will be launched. This wizard will guide the user through basic configuration steps that is
essential for first time connection to the Switch.
Step 1 - Web Mode
The Switch supports two Web Modes, Standard Mode and Surveillance Mode. The Standard Mode is
used to configure, manage, and monitor most of the software features on the Switch. The Surveillance
Mode is an additional web mode specifically designed to assist the user with surveillance features
supported by the Switch.
fields that can be configured are described below:
Parameter
Standard Mode
Surveillance Mode
Tick the Ignore the wizard next time option to skip the Smart Wizard on the next login.
Click the Exit button to discard the changes made, exit the Smart Wizard, and continue to the Web UI.
Click the Next button to accept the changes made and continue to the next step.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
NOTE: The Web Mode can only be changed when one user session is connected to the
Web UI of the Switch.
Figure 2-3 Web Mode
Description
Select this option to access the Standard Mode after the Smart
Wizard was completed.
Select this option to access the Surveillance Mode after the Smart
Wizard was completed.
5
The