D-Link Dis-200G Series Web Ui Reference Manual page 142

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Upgrade button to initiate the firmware upgrade.
Firmware Backup to HTTP
This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Click the Backup button to initiate the firmware backup. Wait for the Web browser to prompt where to
save the file on the local PC.
Configuration Restore & Backup
Configuration Restore from HTTP
This window is used to initiate a configuration restore from a local PC using HTTP.
Figure 12-21
Firmware Backup to HTTP window
131
Description
Enter the source filename and path of the
firmware file located on the local PC. This field
can be up to 64 characters long. Alternatively
click the Browse button to navigate to the
location of the firmware file located on the local
PC.
Description
Enter the source filename and path of the
firmware file located on the Switch here. This
field can be up to 64 characters long.