D-Link Dis-200G Series Web Ui Reference Manual page 127

DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
After hovering (with the mouse pointer) over the network device icon, the following additional information
will be displayed:
After clicking (left-click) the network device icon, the following window will appear.
The fields that can be configured are described below:
Parameter
PD Alive State
PD IP Address
Action
Click the Ping Test button to initiate the ping test to check if the PD is active or not.
Click the Apply button to accept the changes made.
Click the Set to Default button to return the settings to the default settings for this PD.
Click the Cancel button to discard the changes made.
Figure 12-3 Additional Device Information
Figure 12-4
PD Alive Configuration window
Description
Select to enable or disable the PD Alive function here.
Enter the IP address of the PD here.
Select the action that will be taken here. Options to choose from
are Reset, Notify, and Both.
Reset - Specifies to reset the PoE port state (turn PoE off and on).
Notify - Specifies to send logs and traps to notify the
administrator.
Both - Specifies to send logs and traps to notify the administrator
and to reset the PoE port state (turn PoE off and on).
116