Rmon History Settings - D-Link Dis-200G Series Web Ui Reference Manual

After clicking the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.

RMON History Settings

This window is used to configure and display RMON MIB history statistics gathering on the specified port.
To view the following window, click Management > RMON > RMON History Settings, as shown below:
The fields that can be configured are described below:
Parameter
Port
Index
Bucket Number
Interval
Owner
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Show Detail button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 5-13 RMON History Settings window
Description
Select to choose the port.
Enter the history group table index. The value is from 1 to 65535.
Enter Specifies the number of buckets specified for the RMON
collection history group of statistics. The range is from 1 to 65535.
The default value is 50.
Enter the time in seconds in each polling cycle. The range is from
1 to 3600.
Enter the owner string. The string can be up to 127 characters.
Figure 5-12 RMON Statistics Table window
43