Armrest Angle - Permobil M400 Corpus HD Service Manual

M400 Corpus HD
3. Remove the knob holding the lower part of the back rest.
4. Remove the lower section of the back rest by pulling the backrest
plate straight up so it can be removed from the four locking devices.
5. Remove the two screws holding the backrest locking mechanism in
place.
6. Adjust the height of the backrest by mounting the locking
mechanism in desired position.
7. Remount the lower section of the back rest on the seat by carefully
fitting the keyholes on the corresponding pegs and then securing it
by tightening the knob.
8. Slide the upper section of the backrest down until secured in
position by the locking mechanism.
9. Fit a cushion of a suitable height/width for this setting. See
6.2 Backrest cushions , Page 85. Secure the cushion in place using
the Velcro on the back of the cushion.
5.1.3

Armrest angle

WARNING!
Risk of injury while adjusting armrests
Do not subject the armrests to load while adjusting.
The angle of the armrest can be easily adjusted to provide the user with
optimal comfort.
Adjustments - Seat
Figure 126. The lower backrest plate is secured by
means of a knob
Figure 127. The locking mechanism is held in place by
two screws
81