Permobil M400 Corpus HD Service Manual page 41

M400 Corpus HD
4. Remove the slide bushing in the upper section of the leg rest, which
is attached using two screws.
5. Remove the slide bushing in the lower section of the leg rest, and at
the same time use a suitable tool to press in the locking tabs on the
bushing, located in the hole immediately below the top edge of the
leg rest.
4.1.15.2 Mounting the leg rest slide bushings
1. Fit the slide bushing in the lower section of the leg rest, making sure
the locking tabs on the bushing are securely fixed in the hole in the
leg rest.
2. Fit the slide bushing in the upper section of the leg rest using the
two screws.
3. Slide the upper and lower sections of the leg rest together, and pull
the leg rest strap through the leg rest mechanism.
4. Place the mounting plate in the loop of the strap and then mount
this on the front of the leg rest using the two screws.
Figure 60. The slide bushing in the upper section of the
leg rest is attached using two screws.
Figure 61. Slide bushing in the lower section of the leg
rest
Figure 62. Strap mounting on the leg rest
Repairs - Seat
41