Permobil M400 Corpus HD Service Manual page 45

M400 Corpus HD
4.2.1.8 Mounting the front link arm covers
1. Fit the covers using the four screws. See Figure 69 and Figure 70.
2. Fit the drive wheel on the side in question. See
4.2.5.1 Removing the drive wheels .
4.2.1.9 Removing the rear link arm covers
Both sides of the link arms have covers fitted. The covers are fitted with
four screws (TX20).
1. Switch off the main power switch on the control panel.
2. Remove the chassis rear cover. See
4.2.1.3 Removing the rear chassis covers , Page 43.
3. Remove the four screws holding the covers.
4.2.1.10 Mounting the rear link arm covers
1. Fit the covers using the four screws. See Figure 71 and Figure 72.
2. Fit the chassis rear cover. See
4.2.1.4 Mounting the rear chassis covers , Page 43.
4.2.1.11 Removing the drive motor covers
The following tools are necessary for this task:
• Allen key 3 mm
• Allen key 2.5 mm
Repairs - Chassis
Figure 70. Front link arm covers
Figure 71. Rear link arm covers
Figure 72. Rear link arm covers
45