Permobil M400 Corpus HD Service Manual page 67

M400 Corpus HD
3. Disconnect the indicator lights at the connector on the cabling. This
is positioned on the inside of the chassis, next to the seat lift.
4. The indicators are delivered mounted on the drive motor cover.
Remove the drive motor cover, it's fitted with two screws.
Mounting front turn signal
The following tools are necessary for this task:
• Torx key TX20
• Allen key 3 mm
1. The indicators are delivered mounted on the drive motor cover. Fit
the drive motor cover, it's fitted with two screws. Fit the indicators
cabling together with the drive motor cabling in to the wheelchairs
chassis.
2. Connect the indicators cabling to the connectors on the cabling.
This is positioned on the inside of the chassis, next to the seat lift.
3. Remount the front and upper chassis covers. See
4.2.1.2 Mounting the front chassis covers , Page 43 and
4.2.1.6 Mounting the upper chassis covers , Page 44.
4.2.13.2 Front lights
Removing front light
The following tools are necessary for this task:
• Torx key TX20
• Allen key 3 mm
1. Switch off the main power switch on the control panel.
2. Remove the front and upper chassis covers. See
4.2.1.1 Removing the front chassis covers , Page 43 and
4.2.1.5 Removing the upper chassis covers , Page 44.
Repairs - Chassis
Figure 98. The conectors on the front light and
indicators cabling
Figure 99. The drive motor cover is fitted with two
screws
67