Permobil M400 Corpus HD Service Manual page 91

M400 Corpus HD
• Check all connections and switches for the indicated inhibit signals.
7.2.6.7 Joystick Calibration Error
This occurs when joystick calibration has been unsuccessful.
• Go to OBP (on board programming) mode and recalibrate.
If the error persists, the joystick module may be defective. Read more
in 7.4 Repairing defective units , Page 98.
7.2.6.8 Latched Timeout
This occurs when the control system detects that the programmed block
time has been exceeded. This may be due to insufficiently frequent use
of the signal units (joystick, main steering device, suction and blowing
device, etc.)
The error reference provides information on why the control system has
left block mode.
• Switch power on and off.
• Activate block mode.
If the error persists after the checks listed above, the signal unit may be
defective. Read more in 7.4 Repairing defective units , Page 98.
7.2.6.9 Brake Lamp Short
This occurs when the control system detects a short circuit in the brake
light electrical circuit.
• Check the brake lamps, their cables and the connections to the
control system.
7.2.6.10 Lamp Short
This occurs when the control system detects a short circuit in the
electrical circuit of one of the lights.
7205 - Short circuit left-hand lamp.
7209 - Short circuit right-hand lamp
• Check the lamps, their cables and the connections to the control
system.
7.2.6.11 Indicator Lamp Short
This occurs when the control system detects a short circuit in the
electrical circuit of one of the turn signals.
7206 - Short circuit left turn signal.
720A - Short circuit right turn signal.
• Check the turn signals, their cables and the connections to the
control system.
7.2.6.12 Indicator Lamp Failed
This occurs when the control system detects an error in the electrical
circuit of one of the turn signals. This usually means the turn signal
needs replacing.
7207 - Error in left turn signal.
7208 - Error in right turn signal.
• Check the turn signals, their cables and the connections to the
control system.
Troubleshooting - Diagnostics R-net LCD control panel
91