Permobil M400 Corpus HD Service Manual page 49

M400 Corpus HD
4. Put the circuit breaker in the "OFF" position.
5. Remove the chassis covers. See
4.2.1.1 Removing the front chassis covers , Page 43,
4.2.1.3 Removing the rear chassis covers , Page 43, and
4.2.1.5 Removing the upper chassis covers , Page 44
6. Remove the front and rear seat support. See
4.2.2.1 Removing the seat support , Page 47.
7. Loosen the battery terminals on the front and rear battery. Also see
the sticker on the inside of the chassis front cover.
8. Lift/pull the batteries out using the battery straps.
4.2.3.2 Mounting batteries
WARNING!
Replacing batteries and circuit breakers
Always turn the main circuit breaker to the Off position when replacing
batteries or circuit breakers.
Exercise caution when using metallic objects during work with batteries. A
short-circuit can easily cause an explosion. Always use protective gloves and
goggles.
The following tools are necessary for this task:
• Wrench 10 mm
Repairs - Chassis
Figure 79. Main fuse/battery isolator (On/Off)
Figure 80. Rear Battery terminals
Figure 81. Front Battery terminals
49