Permobil M400 Corpus HD Service Manual page 33

M400 Corpus HD
6. Carefully move the armrests together with armrest hinge backwards.
Lay the armrest together with the armrest hinge behind the seat.
7. Loosen the two screws on the left and the right side of the backrest
profile.
8. Slide the backrest profile out from the hinge and slewing bracket by
pulling it straight up.
9. Loosen the screws on the left and right side of the backrest profile
and then remove its end cover by sliding it straight out.
Figure 43. The armrests together with the armrest hinge
are only attached by the two tie bars to the seat.
Figure 44. The backrest profile is secured by two
screws on the left and right.
Figure 45. The end cover of the backrest profile is
secured using one screw on the left side and one on the
right.
Repairs - Seat
33