Permobil M400 Corpus HD Service Manual page 68

M400 Corpus HD
3. Disconnect the lights at the connection on the cabling. This is
positioned on the inside of the chassis, next to the seat lift.
4. Remove the front link arm covers. See
4.2.1.7 Removing the front link arm covers , Page 44. Take note of
how the lights cabling is placed underneath the cover of the
linkarm.
5. Remove the light, it's mounted with two screws.
Mounting front lights
The following tools are necessary for this task:
• Torx key TX20
• Allen key 3 mm
1. Fit the light with the two screws. Adjust the light to desired angle
before tightening the upper screw.
2. Fit the front link arm covers. See
4.2.1.8 Mounting the front link arm covers , Page 45. Take care of
how the lights cabling is placed underneath the cover of the
linkarm.
3. Connect the indicators cabling at the connectors on the cabling.
This is positioned on the inside of the chassis, next to the seat lift.
68
Repairs - Chassis
Figure 100. The conectors on the front light and
indicators cabling
Figure 101. The front lights are mounted with two
screws