Permobil M400 Corpus HD Service Manual page 44

M400 Corpus HD
4.2.1.5 Removing the upper chassis covers
The cover is fitted with four knobs.
1. Move/fold the leg rests out and, if necessary, raise the seat.
2. Switch off the main power switch on the control panel.
3. If fitted, remove the front chassis cover. See
4.2.1.1 Removing the front chassis covers , Page 43.
4. Remove the two remaining knobs holding the cover.
5. Remove the cover by pulling/lifting it backwards.
4.2.1.6 Mounting the upper chassis covers
1. Move/fold the leg rests out and, if necessary, raise the seat.
2. Switch off the main power switch on the control panel.
3. Fit the rear chassis cover before the two rear knobs on the upper
chassis cover is fitted.
4. Fit the front chassis cover before the two front knobs on the upper
chassis cover is fitted.
4.2.1.7 Removing the front link arm covers
Both sides of the link arms have covers fitted. The covers are fitted with
four screws (TX20).
1. Switch off the main power switch on the control panel.
2. Remove the drive wheel on the side in question. See
4.2.5.1 Removing the drive wheels .
3. Remove the four screws holding the covers.
44
Repairs - Chassis
Figure 67. The upprer cover is fitted with four knobs
Figure 68. Chassis covers
Figure 69. Front link arm covers