Changing To A Size That Is Not Automatically Detected; Changing To A Custom Paper Size - Ricoh Pro C7200S Operator's Manual

Changing to a Size That Is Not Automatically Detected

If you load a paper size that is not selected automatically, specify the paper size using the control panel.
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Select the tray for which you want to change the paper size.
4. Select the [Manual Setting] check box.
5. Press [Edit the Settings].
6. Press [Paper Size].
7. Select the loaded paper size, and then press [Save Paper].
8. Press .
9. Press [Home] ( ) at the bottom of the screen in the center.
• For details about paper sizes selected automatically, see page 207 "Recommended Paper Sizes
and Types".
• If you want to print on paper that is selected automatically after printing on a paper size that is not
selected automatically, you must return the setting to [Auto Detect]. Reload the paper, and select
[Auto Detect] in step 6.

Changing to a Custom Paper Size

When the custom size paper is loaded, the user must specify the paper size using the control panel.
1. Press [Tray Paper Settings] in the upper left corner of the screen.
Changing the Paper Size
205